Our Courses

CPPCLDG3001A Licence to Perform Dogging

Our nationally accredited Dogging course is designed to give you the knowledge and skills necessary, in selecting appropriate lifting gear when slinging and moving loads.

There are two components involved in dogging. The first involves moving a load using slinging techniques and the second involves the directing of a hoist or crane operator.

Our courses are delivered by industry experts that have spent years working within the crane industry. This comprehensive course will help you gain the necessary skills to plan inspect and perform the tasks necessary in a safe manner and is delivered at our Gold Coast Facility.

Who is this course for?

This course is for those who want to work with in the crane industry or are currently working within the industry and are looking to up skill.

What is dogging operations?

Dogging work is the use of slinging techniques including planing, selecting and inspecting lifting gear to safely sling a load, or the directing of a plant operator in the movement of a load.

On Successful Completion

On successful completion of the assessment requirements of these unit participants will be issued a Statement of Attainment CPCCLDG3001A Licence to perform dogging (DG).

Upon successful completion of this course, participants must apply for their HRWL online with WHSQ within 60 days, Licencing fees apply.

Please contact our friendly staff by phone or email, and they will be happy to help with a course that may suit your needs on 0755 765733 or info@gltraining.com.au.

What is covered in this course?
\

Relevant Australian Standards, Legislation and Regulations

\

WHS policy

\

Codes of Practice

\

Work requirements, safety information and procedures

\

Hazards identification and control

\

Cranes, understanding characteristics

\

Hand Signals and Whistles

\

Selection and inspection of lifting gear and equipment

\

Fibre ropes, bends knots and hitches

\

Slinging techniques

\

Slinging and moving of loads

\

Load movement and placement

What is covered in this course?
\

Prerequisite: You must be 18 years of age or over

\

Read and write English to a basic level

\

Have the necessary health and fitness to carry out the work safely

Licence to perform Dogging

NameDateTimeLocationAvailable SpacesCost

TLILIC0003 – Licence to operate a forklift truck (LF)

We specialise in Forklift training for all skill levels and experience. For those who have never been around forklifts from those who have been driving for years and may have let their licence expire we cater for all needs. 

We have an online axcelerated course best suited to those who can use a computer and can learn via self paced learning for some of the theory aspects of the course. 

We also offer a three day face to face for those will litlle or no experience or may be better suited to face to face training. Please see below for details of each course type or call us to discuss your options on (07) 5576 5733

Course Duration Online plus Practical and Assessment Two Days

  • TLILIC0003 Licence to operate a forklift truck
  • The course runs over two days and consists of both theory and practical training, with the Licence test to be conducted on the second day
  • There is pre course reading that needs to be completed prior to coming to training this will help you gain a better understanding of the course and content

Course Duration Face to Face including Practical and Assessment Three Days

  • TLILIC0003 Licence to operate a forklift truck
  • The course runs over three days and consists of both theory and practical training, with the Licence test to be conducted on the third day
  • This delivery method is suited to those who prefer to interact with the trainer throughout the process and have limited internet access

Please contact our friendly staff by phone or email to receive further information about our forklift licence training, and they’ll be happy to help with with a training plan that will help you achieve your licence – 07 5576 5733 or info@gltraining.com.au.

What is covered in this course?
\

Introduction to Forklift Training

\

Explanation of Relevant Australian Standards, Legislation and Regulations

\

OH&S policy

\

Codes of Practice

\

Forklift manufacturers specifications and instructions

\

Hazard Identification and hazard prevention

Licence to operate a Forklift Truck - 3 Day face to face

NameDateTimeLocationAvailable SpacesCost
Licence to operate a Forklift Truck - 3 Day face to face 16 - 18 December 2020 07:00 am - 03:30 pm 8 Ryecroft Street Carrara 3 $400.00
Licence to operate a Forklift Truck - 3 Day face to face 4 - 6 January 2021 07:00 am - 02:30 pm 8 Ryecroft Street Carrara 6 $400.00


Licence to operate a Forklift Truck - 2 Day plus Online

NameDateTimeLocationAvailable SpacesCost
Licence to operate a Forklift Truck - 2 Day plus Online 7 & 8 January 2021 07:00 am - 03:30 pm 8 Ryecroft street Carrara 6 $350.00

TLILIC0005 Licence to Operate a Boom-Type Elevating Work Platform (Boom Length 11 Metres or More)

Course Duration Online plus Practical and Assessment Two Days

  • TLILIC0005 Licence to operate a Boom Type Elevating Work Platform over 11 m
  • The course runs over two days and consists of both theory and practical training, with the Licence test to be conducted on the second day
  • There is pre course reading that needs to be completed prior to coming to training this will help you gain a better understanding of the course and content

Course Duration Face to Face including Practical and Assessment Three Days

  • TLILIC0005 Licence to operate a Boom Type Elevating Work Platform over 11 m
  • The course runs over three days and consists of both theory and practical training, with the Licence test to be conducted on the third day
  • This delivery method is suited to those who prefer to interact with the trainer throughout the process and have limited internet access

All these delivery modes still require you to come to our facility to complete the practical components and National Assessments. These can be scheduled for a time that suits you with a one on one practical with your trainer.

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

What is covered in this course?
\

Introduction

\

Relevant Australian Standards, Legislation and Regulations

\

OH&S policy

\

Codes of Practice

\

Designs and functions of EWP equipment

\

Signaling methods and communications

\

Hazard identification and hazard prevention

\

Working at heights

\

JSA’s / Safe Work Methods Statements

\

Plan work

\

Pre-operational checks

\

Set up, Operate and shut down EWP

Licence to operate EWP over 11m - 3 Day face to face

NameDateTimeLocationAvailable SpacesCost
Licence to operate EWP over 11m - 3 Day face to face 9 - 11 December 2020 07:00 am - 02:30 pm 8 Ryecroft Street Carrara 2 $450.00
Licence to operate EWP over 11m - 3 Day face to face 14 - 16 December 2020 07:00 am - 02:30 pm 8 Ryecroft Street Carrara 6 $450.00
Licence to operate EWP over 11m - 3 Day face to face 5 - 7 January 2021 07:00 am - 02:30 pm 8 Ryecroft street Carrara 6 $450.00

Licence to operate EWP Over 11m - 2 Day plus Online

NameDateTimeLocationAvailable SpacesCost

TLILIC0002 Licence to Operate Vehicle Loading Crane (10 metre tonnes and above)

Who is the vehicle crane operation course for?

This course is for anyone who operates a vehicle loading crane that has the capability of picking up a load where the radius multiplied by the lifting capacity is equal to or greater than 10m. Eg Radius of 5m with a lifting capacity of 2 tonne = 10 Metre tonne. If you are unsure please give us a call.

What is vehicle crane operations?

This unit specifies the skills and knowledge required to safely operate a vehicle loading crane with a capacity of 10 metre tonnes or more.

Vehicle loading crane means a crane mounted on a vehicle for loading and unloading the vehicle.

This unit applies to the activities of a person operating a vehicle loading crane with a capacity of 10 metre tonnes or more and includes applying load estimation, load connection to the crane, correct set up, interpretation of dogging signals, Smooth operation.
A person performing this work is required to hold a vehicle loading crane high risk work (HRW) licence. (CV)

This unit requires a person operating vehicle loading crane to plan the work, conduct routine checks, set up the crane, shift loads in a safe manner and safely shut down and secure the crane.

Prerequisite

You must hold a current Dogging Licence (DG) to enrol in this course.

Licencing/Regulatory Information

This unit is based on the licencing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations, HRW and meets Commonwealth, State and Territory HRW licencing requirements.

On Successful Completion

On successful completion of the assessment requirements of this unit participants will be issued a Statement of Attainment TLILIC0002 Licence to operate a Vehicle Loading Crane (CV)

Upon successful completion of this course, participants must submit an application for their HRWL Licence through an online process with WHSQ within 60 days, Licencing fees apply.

Please contact our friendly staff by phone or email, and they’ll be happy to help with pricing information on 0755 765733 or info@gltraining.com.au.

Course duration

Minimum 5 days.

What is covered in this course?
\

Introduction

\

Relevant Australian Standards, legislation and Regulations

\

OH&S policy

\

Codes of Practice

\

Work requirements, safety information and procedures

\

Hazards identification and control

\

Cranes, understanding characteristics

\

Demonstrate signals

\

Inspection of lifting gear and equipment

\

Moving of loads

\

Load movement and placement

Course prerequisites
\

You must be 18 years of age or over

\

Read and write English to a basic level

\

Have a general understanding of mathematics

\

Have the necessary health and fitness to carry out the work safely

\

Be able to provide necessary identification

Vehicle Crane

NameDateTimeLocationAvailable SpacesCost

CPCCLSF2001A – Licence to Erect, Alter and Dismantle Scaffolding Basic Level

Who is this course for?

Anyone who is required to erect, alter or dismantle scaffold more than 3 bays wide and/or 4 metres high.

Course details

This unit specifies the outcomes required to erect, alter and dismantle scaffolding at the basic level, consisting of scaffolding work connected with the operation or use of modular or pre-fabricated scaffolds, cantilevered materials hoists with a maximum working load of 500kg, ropes and gin wheels, safety nets and static lines, and bracket scaffolds (tank and formwork) for licencing purposes.

On Successful Completion

On successful completion of the assessment requirements of this unit participants will be issued a Statement of Attainment CPCCLSF2001A Licence to Erect, Alter and Dismantle Scaffolding Basic Level.

Upon successful completion of this course, participants must submit an application for their HRWL Licence through an online process with WHSQ within 60 days, Licencing fees apply.

Please contact our friendly staff by phone or email, and they’ll be happy to help with pricing information on 0755 765733 or info@gltraining.com.au.

What is covered in this course?
\

Scope of work to plan the job

\

Select and inspect equipment

\

Set up task

\

Erect scaffold and scaffold equipment

\

Dismantle scaffold and scaffold equipment

CPCCLSF2001A Licence to Erect, Alter and Dismantle Scaffolding Basic Level

NameDateTimeLocationAvailable SpacesCost

CPCCLHS3001A – Licence to Operate a Personnel and Materials Hoist

Who is this course for?

Anyone who is required to operate a personnel or materials hoist in the construction or mining industry.

Course details

This unit specifies the outcomes required to operate a builder’s hoist in which personnel, goods and/or materials may be hoisted, and which comprises a car, structure, machinery or other equipment associated with the hoist, and which may be a cantilever hoist, a tower hoist or a multiple winch operation. Included in this definition are situations where winches may be configured to operate as hoists for the transportation of personnel for licencing purposes.

On Successful Completion

On successful completion of the assessment requirements of this unit participants will be issued a Statement of Attainment CPCCLHS3001A Licence to Operate a Personnel and Materials Hoist.

Upon successful completion of this course, participants must submit an application for their HRWL Licence through an online process with WHSQ within 60 days, Licencing fees apply.

Please contact our friendly staff by phone or email, and they’ll be happy to help with pricing information on 0755 765733 or info@gltraining.com.au.

What is covered in this course?
\

Plan work

\

Conduct routine checks

\

Conduct hoist operations

\

Shut down and secure hoist

CPCCLHS3001A – Licence to Operate a Personnel and Materials Hoist

NameDateTimeLocationAvailable SpacesCost

RIIHAN309D – Conduct Telescopic Materials Handler Operations

Who is this course for?

Any person intending to work on or be present on a construction or agricultural site required to conduct telescopic materials handler operations in the Resources and Infrastructure Industries.

Course Details:

Candidates must demonstrate personal awareness and knowledge of health and safety legislative requirements to work safely and prevent injury or harm to oneself and others while using a telescopic materials handler.

Please contact our friendly staff by phone or email, and they’ll be happy to help with pricing information on 0755 765733 or info@gltraining.com.au.

What is covered in this course?
\

Identifying Work Health and Safety (WHS) legislative requirements

\

Plan and prepare for use of a telescopic materials handler

\

Conduct pre-operational checks & operations

\

Move items in a safe manner

\

Secure, conduct post operational checks, basic maintenance and secure site

RIIHAN309F Conduct telescopic materials handler operations

NameDateTimeLocationAvailable SpacesCost

RIIWHS202D Enter & Work in Confined Spaces

We have changed the way we now deliver this course and now have several delivery modes available.

  • Face to Face small groups
  • Online Unit of competency platform

All these delivery modes still require you to come to our facility to complete the practical components and final assessments.

GL Training specialise in confined space training for Brisbane and the Gold Coast. Our trainers are all industry trained and have spent many years working in and around confined spaces so we have a purpose-built Confined Space that allows all candidates to enter a confined space under permit conditions.

All our confined space courses include Test Gas Test Atmosphere

We deliver the following units

  • RIIWHS202D Enter and Work in a Confined Space
  • MSMWHS217 Gas test atmospheres

Course Overview

Note: This is an entry level course which allows you to conduct a risk assessment and enter a confined space to conduct work. This nationally recognised training course is designed for people who work in or around confined spaces. Our courses can be tailored to suit industry needs through carefully planned scenarios that help Identify confined space hazards, our training facility uses real confined spaces and all the latest monitors and tripods to demonstrate the equipment used whilst working in a confined space.

This course is recommended for:

Anybody who must work or supervise work in a confined space

Course duration

8 Hours Face to Face

Please contact our friendly staff by phone or email, and they’ll be happy to help with pricing information – 07 5576 5733 or info@gltraining.com.au.

What is covered in this course?
\

Identifying confined spaces

\

Identification and control of hazards

\

Case studies

\

Risk assessments and hierarchy of hazard controls

\

Work to a confined space permit

\

Work site policy and procedures

\

Write work plans and risk assessments

\

Lockout and tag out methods of isolation

\

Fall protection equipment

\

Practical entry into a confined space

\

Safety and emergency procedures

Examples of confined spaces include (but are not limited to):
\

Tank cars

\

Process vessels

\

Boilers

\

Storage tanks

\

Pits and degreasers

\

Pressure vessels

\

Silos and other tank-like compartments

\

Pipes

\

Sewers

Enter and Work in a Confined Space Including Gas Atmosphere Testing

NameDateTimeLocationAvailable SpacesCost
Enter and Work in a Confined Space Including Gas Atmosphere Testing 17 December 2020 07:00 am - 02:30 pm 8 Ryecroft Street Carrara 8 $200.00

Enter and Work in a Confined Space Including Gas Atmosphere Testing_online plus Practical

NameDateTimeLocationAvailable SpacesCost

RIIWHS204D Working Safely at Heights

Our Working safely at Heights program has been designed to cater for all levels of knowledge and experience. We offer courses for those who have never been exposed to working at heights to those who are highly experienced and conduct this training every 2 years. 

Our online course allows you the flexibility to train at home at a time that is convenient for you and then attend our facility to complete the practical activity to minimise time off work. 

Our full day course covers everything you need to know without any pre course activities.

 

We have changed the way we now deliver this course and now have several delivery modes available.

  • Face to Face small groups
  • Online Unit of competency platform

All these delivery modes still require you to come to our facility to complete the practical components and final assessments.

The course covers theory and practical aspects of working at height. During the course you will develop the necessary skills to identify the hazards and risks associated with working at heights and will enable you to comply with the WHS requirements to work at heights.

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

What is covered in this course?
\

Access, interpret and apply height safety procedures and ensure the work activity is compliant

\

Inspect site to determine layout and physical condition, condition of structures, prevailing weather conditions, equipment requirements and potential hazards

\

Select and install appropriate signs and barricades

\

Adhere to WHS requirements

\

Identify, select and check safety equipment for serviceability

Work Safely at Heights Face to Face

NameDateTimeLocationAvailable SpacesCost
Work Safely at Heights Face to Face 11 December 2020 07:00 am - 02:30 pm 8 Ryecroft Street Carrara 3 $200.00
Work Safely at Heights Face to Face 14 December 2020 07:00 am - 02:30 pm 8 Ryecroft Street Carrara 8 $200.00
Work Safely at Heights Face to Face 21 December 2020 07:00 am - 02:30 pm 8 Ryecroft Street Carrara 7 $200.00
Work Safely at Heights Face to Face 8 January 2021 07:00 am - 02:30 pm 8 Ryecroft Street Carrara 4 $200.00


Work Safely at Heights - 1/2 Day plus Online

NameDateTimeLocationAvailable SpacesCost
Work Safely at Heights - 1/2 Day plus Online 18 December 2020 11:30 am - 03:00 pm 8 Ryecroft Street Carrara 8 $180.00

RIIHAN301E Elevating Work Platform (EWP) Under 11 Metres

Our EWP under 11m course will give you all the knowledge and training to safely operate a scissor type EWP and a boom type EWP that does not exceed 11m of reach. You will be issued a statement of attainment and photo card for your wallet. 

We have an online option for those who are experienced or can learn easily online. You will be required to complete an online learning module at home in your own time and then attend a practical session for a half day to minimise your time off work.

This course teaches the necessary knowledge and skills to operate a Elevating Work Platform under 11 metres which are not classed as requiring a HRWL, if you are required to work above 11 metres please see our over 11 metre 3 day course TLILIC0005.

The Under 11 metre course includes the use:

  • Boom lift EWP (under 11 metre)
  • Scissor lift (at any height)

Upon successful completion students will receive a statement of attainment and a photographic ID card deeming them competent in the use of scissor lifts (SL) and Boom lifts (BL)

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

Operate Elevating Work Platform under 11m including Scissor Face to Face

NameDateTimeLocationAvailable SpacesCost
Operate Elevating Work Platform under 11m including Scissor Face to Face 11 December 2020 07:00 am - 03:30 pm 8 Ryecroft street Carrara 3 $225.00
Operate Elevating Work Platform under 11m including Scissor Face to Face 22 December 2020 07:00 am - 03:30 pm 8 Ryecroft Street Carrara 6 $225.00
Operate Elevating Work Platform under 11m including Scissor Face to Face 8 January 2021 07:00 am - 02:30 pm 8 Ryecroft street Carrara 3 $225.00

Operate Elevating Work Platform under 11m - 1/2 Day plus Online

NameDateTimeLocationAvailable SpacesCost
Operate Elevating Work Platform under 11m - 1/2 Day plus Online 18 December 2020 07:00 am - 11:30 am 8 Ryecroft Street Carrara 1 $200.00

CPCCWHS1001 - Prepare to work safely in the construction industry (White card)

Designed for all those working within the construction industry and for those that wish to start a career within the construction industry.

This unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self and others. It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work.

This course must be delivered via Face to Face learning at our Carrara Campus and is not offered via Online delivery mode.

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

What is covered in this course?
\

Identify OHS legislative requirements

\

Identify construction hazards and control measures

\

Identify OHS communication and reporting processes

\

Identify OHS incident response procedures

Prepare to Work Safely in the Construction industry (White Card)

NameDateTimeLocationAvailable SpacesCost
Prepare to Work Safely in the Construction industry (White Card) 7 December 2020 07:00 am - 01:30 pm 8 Ryecroft Street Carrara 5 $110.00
Prepare to Work Safely in the Construction industry (White Card) 19 January 2021 07:00 am - 01:30 pm 8 Ryecroft street Carrara 9 $110.00

RIIWHS205D Control Traffic With a Stop-Slow Bat

To be accredited as traffic controller in Queensland, a person must complete a Department of Transport and Main Roads (TMR) Approved Traffic Controller Training Course.

The course comprises the national competency unit RIIWHS205D Control traffic with a stop-slow bat, and content from the Traffic Controller Accreditation Scheme Approved Procedure (TCASAP). The course must be completed in a 12-month period prior to the accreditation application being lodged with TMR. The course has two parts.

3 day course delivered with a mix of theory and practical. Day 1 in the classroom for an entire day covering all of the theory aspects of the course, Days 2 & 3 will be practical activities at Country Paradise Parklands Nerang. (for legislation/legal reasons you must hold a construction white or blue card prior to starting any practical activity). You will undertake a final assessment, once deemed competent you will receive all your paperwork from us to then lodge your application to Queensland Transport where they will process your application.

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

What is covered in this course?
\

Prerequisites for Traffic Controller accreditation

\

Legal powers to control traffic

\

Traffic Controller signage and signals

\

Positioning for controlling traffic

\

Planning and preparing for traffic control work

\

Traffic Control Operations – procedures for two-way and multi-lane roads

\

Emergencies and incident reporting

\

Communications

\

Worksite Clean up

\

Accreditation

COURSE PREREQUISITES
\

Must hold a White card

\

Have an Open or provisional drivers licence other than Learners permit

\

Meet the criminal and traffic history requirements

Control Traffic with a Stop Slow Bat 3 Day Program

NameDateTimeLocationAvailable SpacesCost

RIIWHS205D Control Traffic With a Stop-Slow Bat Refresher

Traffic Control – Course for renewal of Traffic Controller accreditation (Queensland only).

Accreditation Frequency

Traffic Controllers are responsible to ensure that they maintain current accreditation to allow them to continue performing traffic controller duties.

Traffic Controllers must renew their Industry Authority Card every three (3) years and No traffic control duties should be undertaken if authority has expired.

Accreditation Renewal Requirements

To renew your Queensland traffic controller a person must:

    Successfully complete a Department of Transport and Main Roads (TMR) Approved Traffic Controller Training Course and demonstrate currency of industry practice as a Traffic Controller.

    Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

What is covered in this course?
\

Prerequisites for Traffic Controller accreditation

\

Legal powers to control traffic

\

Traffic Controller signage and signals

\

Positioning for controlling traffic

\

Planning and preparing for traffic control work

\

Traffic Control Operations – procedures for two-way and multi-lane roads

\

Emergencies and incident reporting

\

Communications

\

Worksite Clean up

\

Accreditation

RIIWHS302D Traffic Management Implementation

We offer both Initial and Refresher training for Implement Traffic Management Plans.

As of the 1st of October 2019 it will now be a requirement to complete TMR’S Working in Proximity to Traffic – Awareness Part 1 and. Part 2 Working in Proximity to Traffic – Awareness works Protection Methods. Evidence that these have been completed will need to be provided before your TMI card can be issued.

Please find TMR Reference material below

On successful completion of this course trainees will have the skills and knowledge required to read, interpret and implement traffic management plans and to install and remove signs and devices in accordance with the Manual of Uniform Traffic Control Devices Part 3 (MUTCD) ensuring everyone’s safety whilst traffic flow is maintained.

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

What is covered in this course?
\

Plan and prepare to implement traffic management plan/s

\

With the selected traffic guidance scheme, be able to:

\

Set out

\

Monitor

\

Close down

\

Clean up

\

Access and apply site safety procedures

\

Apply personal and operational safety measures

\

Maintain personal wellbeing

\

Identify and report incidents

\

Plan and prepare for workplace communication and communicate using equipment and systems

\

Carry out face-to-face routine communication

\

Complete written documentation

Prerequisites
\

Must hold a White card

Implement Traffic Management Plans

NameDateTimeLocationAvailable SpacesCost

Traffic Management Implementation Refresher

GL Training offers a renewal program for TMI. This course is run over the duration of a day and as of the 1st of October 2019 the following prerequisites are required prior to completion of the program;

Renewal Program

To continue to be recognised as a TMI Officer in Queensland you must demonstrate ongoing industry currency relevant to the job role of a Traffic Management Implementer, as outlined in the units of competency, by completing a renewal training program before the date of expiry (TMI cards are valid for three years from date of issue)

This program will come into affect on the 1st October 2019.

What are the pre-requisites for the renewal program?

Working in Proximity to Traffic – Reference Materials

These are compulsory requirements after the 1st of October 2019 those that can not provide this evidence may be required to sit the full course.

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

What is covered in this course?
\

Theory assessment is open book requiring a 100% pass mark for candidates to be marked as successful.

\

Currency of industry practice evidence may include:

\

A third party report logging a minimum of three (3) site set ups, completed on live sites to the satisfaction of the RTO.

\

Log books/ job sheets

\

Copies of recent permits/ TGS diagrams/ Signage Sheets implemented

\

JSA/SWMS

Transport and Logistics

Our courses have been developed for the transport and logistics industries and fall in line with NHVR National Heavy Vehicle Regulator. Our trainers are all industry based and have been involved within transport for most of their working careers and offer tailored packages to suit your company or individual needs.

Looking to join the Transport and Logistics Industry?

We have several programs that will allow you to gain the skills and knowledge to apply for a position within the Transport industry and we run week long courses giving you the necessary entry requirements.

Our trainers are Heavy Vehicle QLD licence assessors and are available for all VOC requirements that you may need. We can also offer advice into setting up your policies and procedures.

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

Available courses:
\

TLIA1001 Secure Cargo

\

TLID2004 Load and unload Cargo

\

TLIF0001 Apply Chain of Responsibility

\

TLIF0002 Administer Chain of Responsibility

\

Driver Verification of Competencies up to B Double

Administer Chain of Responsibility

NameDateTimeLocationAvailable SpacesCost

Apply Chain of Responsibility

NameDateTimeLocationAvailable SpacesCost


Load and Unload Cargo

NameDateTimeLocationAvailable SpacesCost


Secure Cargo

NameDateTimeLocationAvailable SpacesCost

Mobile Training

At GL Training we understand that training needs to be flexible and meet the clients needs. We offer an onsite training service that can be tailored to meet most requirements with a fully equipped trailer that can be used as a mobile classroom.

If you are having trouble getting everybody off site or would like to organise an on site training quote please give us a call on 07 5576 5733 or send us an email on info@gltraining.com.au.

E - Learning

As our world is constantly changing due to world events and working time frames we have developed some simple solutions that will enable you to complete some of the theory components from the safety of your own home or office and come in to complete the practical assessments, this also works very well for those who struggle with time away from work.

We have developed the following courses:

These courses have been designed to complete theory component of each of these courses online, you are still required to come to our facility to complete the practical and Final assessments. If this doesn’t work for you we have also developed a number of virtual class room environments that you can simply logon to one of our Virtual classrooms and join the training remotely from your own home, you will need the following to join:

  • Active email account
  • Computer, laptop or tablet
  • Internet access

If any of these are of interest or you need more info please contact us on 07 55765733 or send us an email to info@gltraining.com.au and one of our friendly staff will guide you through the process.

Non-accredited training

GL Training offer companies the service of developing non accredited training solutions for workplace situations that are not covered by an accredited course. We currently deliver tailor made course packages that include verification of competency (VOC) including but not limited to plant and equipment, working at heights, confined space, and all classes of high risk work licences. We have also had tremendous results from our non-accredited load and unload cargo, trailer induction and Lock out tag out courses that have been developed for the Gold Coast City Council.

Give us a call on 07 5576 5733 to discuss a suitable training plan or drop us an email at info@gltraining.com.au.

Verification of Competency (VOC)

GL Training and Safety offer a complete Verification of Competency service from hand held tools through to High Risk Licences. Upon completion we issue a verification of Competency Photo ID Card.

What is Verification of Competency? (VOC)

The VOC process is used to ensure that staff can operate plant and equipment in a safe manner. And that they can operate according to site requirements before the expense of hiring the operator and discovering that the employee does not have the necessary skills for the task or has damaged the equipment due to poor skills.

Most employers are now outsourcing these services to accredited trainers and Registered Training Organisations to assist in their duty of care to provide a safe workplace. GL Training and Safety offers a full program from hand tools through to High Risk Work Licences with our assessments derived from National units of Competency, Legislation and Best Practice.

GL Training and Safety assessors are all qualified and hold the unit of competency, and have worked within the construction industry for many years and have conducted assessments for Bechtel, Lend lease, Santos and Fulton Hogan to name a few.

VOC Assessments are conducted onsite or at one of our training facilities and are accompanied by a full report on the candidate.

In some cases we have been requested to conduct these assessments as some insurance companies are now asking for proof of competency before issuing cover.

Why out source this?

At the beginning employers would conduct these assessments in house using a member of staff, but some found that once an incident had occurred the staff member had not adequately completed the process and in some cases assessments for mates had taken place without the employee having operated the plant or machinery before.

GL Training and Safety takes this risk away by using accredited assessors to complete the assessments who have the up to date knowledge of current safety training requirements.

Please contact us on 07 5576 5733 or Email info@gltraining.com.au to discuss any requirements that you may have.